
ELKON Expands in South America with New Installation in Peru
ELKON continues to strengthen its footprint across South America with the successful installation of a Mix Master-30
• Power Panel & Electronic Weighing System
• PLC brand: ABB or SIEMENS
• Equipped with cooling fan
• Weight Indicators: Laumas (ITALY)
• Slump values monitored digitally and analog
• Easy & percise calibration
• Convenient maintenance access
• Capacity: 2x5 m³ or 4x5m³
• Vibrators from OLI-WAM (ITALY)
• Saddles adjust flowrate of material
• No concrete ramp needed
• Stores 2-4 types of aggregate
• Dry Filling Capacity: 750L
• Vibrated Concrete Capacity: 500L
• Capacity: 0.5 m³ vibrated concrete/charge
• Aggregates weighed inside mixer
• Mixing Paddle: 5 units (Mn alloyed cast steel )
• Inner Lateral Scraper: 1 unit
• Outer Lateral Scraper: 1 unit
• Drive: 22 kW motor + gearbox
• Cement Feeding Bunker Capacity : 1 m3
• Equipped with grid & covering
• Capacity: 0.5 m³ vibrated concrete/charge
• Cement Screw Capacity: 25 ton/hr
• Dimensions: Ø 165 mm
• Drive system: 4 kW motor+ planetary gearbox
• Equipped with galvanized maintenance lids
• Drive: 22 kW motor + gearbox
• Elkon's centralized lubrication system for supporting bearings
• 200 kg/cm² load transfer capacity
• 10 mm total thickness
• 4/2 coating
• 4 multi layer linen cord
• Chevron belt
• Self-lubricated rollers
• Galvanized main chassis
• Capacity: 20 m³/h
• To feed water into water weigh hopper
ELKON Mix Master-30 On-Site Concrete Plant
Produce concrete anywhere, to international standards, at low cost — even on small jobs. Ready to run in about 1 hour.
The MM-30 produces up to
Details: All key components — aggregate bins, pan or planetary mixer, cement, water and additive hoppers, pump, and control center — are mounted on a single trailer chassis with axle and tires.
The ELKON Mix Master-30 sets up in tight spaces and is production-ready in about one hour. No crane required. Concrete can be produced anywhere it’s needed.
With precise weigh hoppers and a fully automated system, Mix Master-30 delivers concrete that meets international standards.
The plant can be configured with a pan or planetary mixer, and with 2 or 4 aggregate bins (5 m³ each) depending on project needs.
It works seamlessly with mobile or stationary pumps, or can discharge directly into a truck mixer via an optional belt conveyor.
For cement supply, choose bag, bulk bag (super sack) feeding, or integrate a silo.
| Capacity | 30 m3/h |
| The Capacity of Aggregate Bins | 2×5 m3 or 4×5 m3 |
| The Capacity of Aggregate Weigh Hopper | Aggregate is weighing in mixer |
| Loading Type of Aggregate to the Mixer | Transfer Conveyor |
| Mixer Capacity | 750/500 l. |
| Mixer Type | Pan / Planetary |
| Cement Weighing Capacity | 300 kg |
| Water Weighing Capacity | 200 kg |
| Additive Weighing Capacity | 1×25 l (for 1 Type Chemical Additive) |
| Control System | Included |
| Operator Cabinet | – |
| Cement Screw Diameter (Ø) | Ø 165 mm |
| Compressor | Included |
| Capacity | 39 yd3/h |
| The Capacity of Aggregate Bins | 2×6.5 yd3 or 4×6.5 yd3 |
| The Capacity of Aggregate Weigh Hopper | Aggregate is weighing in mixer |
| Loading Type of Aggregate to the Mixer | Transfer Conveyor |
| Mixer Capacity | 1/0.7 yd3 |
| Mixer Type | Pan / Planetary |
| Cement Weighing Capacity | 661 lbs |
| Water Weighing Capacity | 441 lbs |
| Additive Weighing Capacity | 1×6.6 gal (for 1 Type Chemical Additive) |
| Control System | Included |
| Operator Cabinet | – |
| Cement Screw Diameter (Ø) | 6 in |
| Compressor | Included |
We can provide optional configurations to meet your specific concrete needs!

ELKON continues to strengthen its footprint across South America with the successful installation of a Mix Master-30

Elkon Canada is proud to spotlight the deployment of the Mix Master-30 Onsite mobile concrete batching plant.

Continuously providing effective solutions to its customers, ELKON has been becoming the preferred concrete batching plant supplier